ADVANCED FEATURES
Pulsarlube MSP
SERIES
MSP60 : Ø91(3.60") x 181mm(7.13") (H)
-
60
The Pulsarlube MSP units offer the advantage of providing automatic lubrication to machinery that
is infrequently or intermittently used by synchronizing itself to the equipment, thereby avoiding the problem of over lubrication.
The Pulsarlube MSP electromechanical automatic grease lubricator is designed to operate in synchronization with the equipment on which it is installed. As long as the equipment is operating, the Pulsarlube MSP will dispense the preset amount of lubricant so that any loss or waste of lubricant can be prevented. This product is a machine synchronized, externally powered unit and the power supply connected to the machine or PLC powers the unit. It is not necessary to replace the battery pack in the unit up to 5 years but the grease pouch should still be replaced after completion of each lubrication cycle set.
NOTE : The MSP 500ml lubricator is also available as an oil version. MSPOL500/VDC and VAC versions.
NOTE : The MSP 500ml lubricator is also available as an oil version. MSPOL500/VDC and VAC versions.
APPLICATIONS
FEATURES
Synchronized
Dispenses a preset amount of lubricant only when equipment is in operation
LCD
Easy to program with built-in LCD and simple button controls
60bar
Up to 8 lube points for multi-point / Max. 10m (33ft) for single point
Service Pack
Substantial savings from the use of replaceable grease pouches and battery packs
PRODUCT INFO
CROSS SECTION
SPEC & CERTIFICATIONS
| SPEC | Description |
|---|---|
| Grease Pouch Capacity | 60ml/125ml/250ml/500ml (replaceable) |
| Power Supply | MSP : External Power Supply |
| Operating Pressure | 30~60bar (435~870psi) |
| Operating Temperature | Standard Alkaline Battery : -15˚C~60˚C (5˚F~140˚F) Optional Lithium Battery : -40˚C~60˚C (-40˚F~140˚F) |
| Dispensing Periods | 60ml : 1~12 month 125ml/250ml : 1, 2, 3, 6, 12 month & H (15 days) 500ml : 1, 2, 4, 6, 12, 18, 24 month & H (15 days) |
| Remote Installation | Max. 10m (33ft) with O.D. Ø6 tube |
| Multi-Point Installation | Max. 6m (20ft) with O.D. Ø6 tube (Up to 8 lube points) |
| Packaging | 10 Units/Case |
| Certification | Description |
|---|---|
| IP Code | N/A |
| Etc. | N/A |
| MSP VAC | MSP VDC | |
|---|---|---|
| Voltage Rate Input Range | AC Adaptor (100~220V) | DC-DC Convertor (12~24V) |
| Voltage Rate Output Range | 5.0V, 2A | 5.0V, 2A |
| Power ON Indicator | Red LED | Red LED |
| Relay Box Dimensions | 85mm (D) x 49mm (W) x 32mm (H) | 85mm (D) x 49mm (W) x 32mm (H) |
| Wire Length | Input 1m (3ft) / Output 4m (13ft) | Input 1m (3ft) / Output 4m (13ft) |
INSTALLATIONS
| Part No. | Description |
|---|---|
| A001 | Reducer, 3/8"F x 1/4"M Adaptor (Brass) |
| A002 | Reducer, 3/8"F x 1/8"M Adaptor (Brass) |
| A002-S | Reducer, 3/8"F x 1/8"M Adaptor (Brass) |
| Part No. | Description |
|---|---|
| A011 | Socket, 1/4"F x 1/4"F Adaptor (Brass) |
| A012 | Socket, 1/8"F x 1/8"F Adaptor (Brass) |
| Part No. | Description |
| A121 | Pipe,1/4”M x 1/4”M x 50mm (Steel) |
| A122 | Pipe,1/4”M x 1/4”M x 100mm (Steel) |
| A123 | Pipe,1/4”M x 1/4”M x 150mm (Steel) |
| A124 | Pipe,1/4”M x 1/4”M x 200mm (Steel) |
| Part No. | Description |
| A106 | Pipe, 1/8"M x 1/8"M x 50mm for divider block (Steel) |
| A107 | Pipe, 1/8"M x 1/8"M x 150mm for divider Pipe, 1/8"M x 1/8"M x 100mm for divider block (Steel) |
| A108 | Pipe, 1/8"M x 1/8"M x 150mm for divider block (Steel) |
| A109 | Pipe, 1/8"M x 1/8"M x 200mm for divider block (Steel) |
| Part No. | Description |
|---|---|
| A023 | 45° Elbow, 1/4”M x 1/4”F Adaptor (Brass) |
| A024 | 45° Elbow, 1/8”M x 1/8”F Adaptor (Brass) |
| Part No. | Description |
|---|---|
| A019 | 90° Elbow, 1/4”F x 1/4”F Adaptor (Brass) |
| A020 | 90° Elbow, 1/8”F x 1/8”F Adaptor (Brass) |
| A021 | 90° Elbow, 1/4”M x 1/4”F Adaptor (Brass) |
| A022 | 90° Elbow, 1/8”M x 1/8”F Adaptor (Brass) |
If the bearing lube point is NPT, use the thread converter (A243) to convert thread metric to inch for bearing zerk (USA only)
- All Parts should be assembled tightly with PTFE tape.
- For optimal performance with remote installation kits, using an NLGI #1 grade grease is recommended.
- If the bearing lube point is NPT, use the thread converter.
| Part No. | Description |
|---|---|
| A002 | Reducer, 3/8"F x 1/8"M Adaptor (Brass) |
| B002 | Mounting Bracket, “L”Shape |
| B051 | Self Drilling Screw, #8 x 20 |
| B057 | Washer |
| A012 | Socket, 1/8”F x 1/8”F Adaptor (Brass) |
| A240 | Tube Fitting, Push-In Type, PC6-PT1/8”M |
| A214-1 | Distribution Tubing, O.D. 1/4"(6mm) Nylon Tubing, 10ft Pre-filled with (Grease Type) |
| A243 | Thread Converter, PT1/8"F x NPT1/8"M (Brass) |
Note : For remote installation using a tube, use an 8mm O.D. (5/16″) tubing pre-filled with the same or compatible grease as the grease contained in the unit. Recommend using under short dispensing period settings due to powerful dispensing pressure.
| Part No. | Description | Q'TY |
|---|---|---|
| A002 | Reducer, 3/8″F x 1/8″M Adaptor (Brass) | 1 |
| B002 | Mounting Bracket, “L”Shape | 1 |
| B051 | Self Drilling Screw, #8 x 20 | 1 |
| DU-2RS ~ DU-8RS | DU Type Divider Block, Grease Type, 2 Ports ~ 8 Ports | 1 |
| B058 | Tooth Washer | 2 |
| A240 | Tube Fitting, Push-In Type, PC6-PT1/8”M | 3 |
| A214-1 | Distribution Tubing, O.D. 1/4″(6mm) Nylon Tubing, 10ft Pre-filled with (Grease Type) | 1 |
| A243 | Thread Converter, PT1/8″F x NPT1/8″M (Brass) | 1 |
